<< Click to Display Table of Contents >> Navigation:  Designing a PCB with the DEX PCB Designer > Designs > Parts > PCB Device Types > Device Package Types > PCB Device Packages > Integrated Circuits > OBGA - Organic Ball Grid Array

The "Organic Ball Grid Array" (OBGA) is a type of packaging used for integrated circuits in which the substrate (the base layer upon which the circuit is formed) is made of organic materials, typically a type of fiberglass-reinforced epoxy laminate commonly used in PCBs (Printed Circuit Boards). This is in contrast to other types of substrates, such as ceramic.

Here's an overview of OBGA and its implications in electronics:

Design and Structure

•Ball Grid Array: As with other BGAs, the OBGA package has an array of solder balls on the underside, which are used to connect the package to the PCB. These solder balls provide the electrical interconnections and are also responsible for mechanical attachment to the board.

•Organic Substrate: The defining feature of OBGA is the use of an organic material for the substrate. This organic base tends to be more flexible and less fragile than ceramic, contributing to a reduction in mechanical stress issues that might otherwise cause cracking or breaking.

•Die Attachment: The semiconductor die is attached to the substrate and wire-bonded to the substrate's connection pads, usually with gold or aluminum wires. The entire assembly is then encapsulated in a plastic mold compound to protect it.

Advantages of OBGA

•Cost-Efficiency: Organic materials are generally cheaper than ceramic, leading to lower production costs. This factor is particularly important when producing integrated circuits on a large scale.

•Thermal Performance: While thermal conductivity of organic materials is generally lower than that of ceramic, the OBGA package design allows for reasonable heat dissipation, often adequate for the intended applications.

•Lightweight: Organic substrates are lighter than their ceramic counterparts, which can be beneficial in weight-sensitive applications, such as aerospace or mobile devices.

•Reduced Brittle Failure: The organic material is less susceptible to cracking from mechanical stress compared to ceramic, providing potentially better reliability under certain conditions.

Challenges and Considerations

•Moisture Sensitivity: Organic materials can be more susceptible to moisture compared to ceramic, potentially leading to reliability issues like corrosion or delamination. Proper storage conditions and protective coatings or encapsulation can help mitigate this risk.

•Thermal Limitations: For applications requiring very high heat dissipation, the lower thermal conductivity of organic materials can be a limitation. In such cases, alternative packaging or additional thermal management strategies might be necessary.

•Process Sensitivity: The materials and construction of OBGA packages can be sensitive to processing conditions such as temperature profiles during soldering, requiring careful control during assembly to prevent damage or reliability issues.

OBGA packages are used in various applications where the balance of cost, performance, and physical properties meets the needs of the device in question. They are commonly found in consumer electronics, automotive systems, and some types of communication hardware. As with any technology selection, engineers must weigh the benefits and limitations of OBGA against the requirements of the specific application and operating environment.